User Manual RelAir ICS ·03/2019 · VERSION 1.0
3
RelAir ICS
1 Functional description
The Relay radio humidity and temperature sensor RelAir ICS can be integrated into an
existing wireless M-Bus OMS network and provides reliable temperature measurement data.
The room temperature and humidity can be monitored wirelessly at any time. A further
advantage of the room climate sensor is its easy assembly. The configuration can be done
local via dip switches. The battery life is up to 10 years for this device depending on the
transmit interval. The two AA batteries are easily replaceable and have a reverse polarity
protection. The following graphic shows an application of the sensor:
2 Scope of delivery
Equipment supplied:
•
OMS radio humidity and temperature sensor with casing and mounting plate
•
2 AA-size alkaline batteries
•
Mounting set consisting of 2 dowels (5mm) and 2 screws (3 x 30mm)
•
Mounting instruction
2 Mounting
2.1 Where to install
The OMS radio humidity and temperature sensor should not be exposed to direct sunlight. In
addition, the sensor should not be mounted on an outside wall, near to an outer door or at a
distance of less than 1m to a heater. The distance from the floor should be at least 1,5m. This
device is designed for wall mounting or mounting on an in-wall box (60 mm).
2.3 Open housing
Before the case is ready for mounting it has to be opened. The locks at the bottom of the casing
must be released one after another. For that a slotted screwdriver is put into the upper part of
the opening.
