background image

2

AirShip™ Wireless 
Airship™ is our newest state of the art zero compression wireless connection for use with the latest Serie S 
and many more RELs to come. Our goal with this design is to deliver a true hardwired quality of connection 
wirelessly. We have prided ourselves on our ability to deliver extremely high levels of sound quality and rock 
solid wireless connection protocols since our first wireless design over a decade ago. Airship™ surpasses any 
earlier design using a 5.8 gigahertz signal, a frequency previously reserved for military use by the US military 
and NATO. It results in the fastest, most transparent wireless the design team has ever experienced and 
verges on hardwired transparency levels.
Ultra-high quality wireless confers a number of benefits to the REL owner, notably, freedom of placement. 
This permits extreme performance without the cumbersome tether of a cable, permitting ideal placement 
without being limited by the length of a wire and can lead to a better sounding, less cluttered experience. 
This gives you the ability to place subs in distant corners, along glass walls, or on hardwood floors allows for 
a superior experience, sonically and aesthetically.

Summary of Contents for AirShip Wireless


















Reviews: