Pg. 28
Doc ID: 191-6300B
Doc Rev: 101722
Clutch Parts
•
Regularly inspect and replace all clutch components
showing signs of wear or excessive heat. Rekluse
recommends inspecting after the first 10 hours of use,
then every 20 hours after that.
•
Measuring the clutch pack
and the EXP disk can help
determine if the
components need to be
replaced.
•
Replace friction disks or
drive plates if they are
glazed or burnt. See the
following section for examples.
•
Regularly change the oil as per the bike/ATV
manufacturer’s recommendations. Clutch performance
and longevity depend on oil quality. Oil
recommendations can also be viewed under Tech Tips
on our website at
www.rekluse.com/support/videos
Basket
•
Inspect the basket dampers and springs by checking the
play between the ring gear and the basket. Replace the
dampers or springs if you feel any play in the assembly.
•
Inspect and replace basket sleeves if they appear to be
notched from the friction disks. Rekluse recommends
replacing them every 25 hours for abusive riding or
racing, every 50 hours for moderate riding, or every time
friction disks are replaced.
