10.
Use
Use
Charging A Device
Check the required power requirements of the device you want to charge. This can
be found in the manufacturers user guide for the device.
Choose an appropriate USB output port for the device you want to charge and
connect the required USB cable to it. Connect the other end of the cable to the device
and press the ‘Power/Torch’ button
A
1
on the powebank once.
Port Type:
Output:
USB ‘C’ Port
A
8
5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.5A
USB ‘A’ Port
A
7
5V/2.1A
USB ‘A’ Fast Charge Port
A
6
5V/3A, 9V/2A, 12V/1.5A
Check that the charge icon has appeared on the device you have connected to
confirm that the battery is charging. If the charging stops before completion press
the ‘Power/Torch’ button
A
1
again to continue charging.
The powerbank will be warm when charging a device. If the powerbank or
device becomes hotter than normal, disconnect the cable immediately from the
device and powerbank and leave it for 5 minutes before trying again.
Disconnect the USB cable once the device has been charged. If the LED lights are still
lit when you disconnect the power cable, they will automatically turn off after a few
minutes.
On average, a good condition fully charged 20100mAH powerbank will provide a
single or partial charge for a laptop, up to 2 charges for a tablet or up to
6 charges for a smartphone.