Assembly instructions
Instructions d’assemblage
Instrucciones de Ensamblaje
2019-11-13
www.rejuvenation.com
6/15
ATTACH THE VANITY BASE TO THE WALL (CONT’D)
3.
Use the drawing below to mark out the location of the vanity base and opening on your wall.
4. In each of the shaded areas, mark 2 fastener locations that align with studs and avoid
plumbing pipes. If you can’t locate studs at the fastener locations
or you have steel studs
,
remove drywall, add 2 x 6 blocking to create fastener locations and reinstall drywall.
5. Drill (4) appropriately sized pilot holes into the studs or blocking to avoid splitting. For the
fasteners supplied with the vanity, use a
1/4” diameter drill bit.
