Rejuvenate Click n Clean, User Manual

Page: 4 / 12

Rejuvenate
®
Click n Clean
™
Instant Assembly
1
Attach Upper Pole section to Lower Pole section making sure to line up the
notch so Bottle Reservoir is facing away and make sure the Spray Trigger is
facing you making sure it is locked in.
2
Attach Mop Base to Lower Pole section by lining it up and click to lock.
3
Attach Super Scrub Pad to Mop Base top as shown.
4
To clean, attach Blue Microfiber Cleaning Pad to Mop Base bottom making
sure it is firmly secure.
1
2
3
4
Use these Rejuvenate
®
Floor Cleaners to Click n Clean
™
www.RejuvenateProducts.com/ClicknClean
No Bucket
Floor Cleaner
Luxury Vinyl
Floor Cleaner
Marble, Granite &
Stone Floor Cleaner
Tile & Grout
Everyday Cleaner
Grout
Deep Cleaner
Carpet Spot
& Stain Remover
Click n Clean
™
Adapters Applicators
For Cleaning / Speed Mopping Floors
1
Remove Floor Cleaner bottle from box and remove cap. Attach Bottle Adapter
(includes 3) to bottle top until secure. For trigger type bottles, remove trigger
and attach bottle adapter as shown.
2
Insert bottle with Bottle Adapter attached into the Bottle Reservoir. Note: You
can use any 32 Oz. or 40 Oz. Rejuvenate ® floor cleaning products with the long
neck as shown or look for
the Click n Clean
™
Logo.
3
Start cleaning.
For Dusting
Remove Blue Microfiber Cleaning pad and attach the
white Dusting Pad as shown to pick up loose dirt, hair,
fur and more.
Grout Cleaning
1
To clean grout, remove Mop Base by pressing the button located on pole base
just below the spray nozzle.
2
Attach grout brush to lower pole base and click to lock.
Remove
Use these Rejuvenate
®
Floor Cleaners to Click n Clean
™
www.RejuvenateProducts.com/ClicknClean
No Bucket
Floor Cleaner
3