Manual Time Setting (for Country without Time signal):
(Use this function when traveling or if you live in a location with no radio time signal)
1.
Press S9 to set Hour and S10 to set Minute manually
2.
Listen carefully to be sure you choose the correct AM or PM alarm time setting.
3.
Press S1 to confirm after you have set the Time (or the clock will confirm one minute later by itself)
4.
After confirmation, the clock automatically runs to the new time that you have set.
Note: The Date, Day, Month and Year cannot be manually set on this clock.
Backlight:
The backlight is switched ON when the S1 button is pressed.
TROUBLESHOOTING:
Your clock is a very delicate and precise instrument. Although uncommon, hard knocks or vibrations can cause the
hands to move irregularly, and therefore display the incorrect time, although the internal clock is keeping accurate
time. You may notice this when the clock is able to receive a signal and announce the right time but the hands are
not synchronized with the talking time. If this occurs, the clock needs to be reset. Please go to “Reset the Clock” for
details.
Reset the Clock:
1. Press S6 (Reset) with a ball pen to reset the clock.
2. The clock will align the hands to 12 o’clock automatically and then perform a signal reception.
3. Put the clock in a location where signal reception is possible after the clock is reset
4. It shows the right time after a signal is received. This may take up to 24 hours depending on your location and
the time the clock is reset.
5. US users must set the right Time Zone after the clock is able to pick up signal. Go to “US Time Zone Setting”
for details.
Clock Not Receiving Time Signal:
Reasons for not being able to receive the Time Signal include:
- Being outside of the US signal area
- Being in a built up area (ex. apartment buildings)
- Metal objects blocking the radio signal
- Interference by a computer or TV monitor
If your clock is unable to make contact with the radio signal, it will continue to function in the same way as a stan-
dard clock. The time will be corrected the next time your clock receives the time signal.
Clock Stops and no talking function:
When the battery is low, the clock hands will stop and talking function is terminated. It is time to change the
batteries. Please go to the “Battery Change” for details.
6.
