Setting Daily Alarm:
The alarm on the Reizen Atomic Talking Analog Alarm Clock is set using 2 large buttons on the front of the clock.
Settings are announced as you go, which improves accuracy in alarm setting and makes it ideal for the visually
impaired.
Set Daily Alarm Hour:
1. Press S2 twice. The clock announces the current Alarm Hour.
2. Continue to press S2 until you reach the desired new Alarm Hour. Listen carefully to be sure to choose the correct
AM or PM alarm time setting.
Set Daily Alarm Minute:
1. Press S3 twice. The clock says the current Alarm Minute.
2. Continue to press S3 until you reach the desired new Alarm Minute.
Press S1 to confirm the new Alarm Time setting (or the clock will confirm itself one minute later.) The clock will
speak the new Alarm Time that you have set.
Snooze Alarm:
1. Press S1 once when the Alarm is “Beeping” to set the clock to Snooze mode
2. The clock will “Beep” after 5 minutes
3. You can hit the Snooze Button up to 5 times.
Turning Off Alarm Sound:
You can turn off the alarm sound (without Snooze) by holding down the S1 button until the clock announces the
current time.
The Alarm is a Daily alarm, so if left on it will sound again the next day. If you want to leave the alarm set, but not
hear it sound you may turn off the Daily Alarm Sound by sliding the S4 to “Off” position.
Alarm ON/OFF:
1. Hold S5 (Wave) down until the clock announces the status of the alarm On/Off. It will say “Alarm is On” or
“Alarm is Off”
2. Then release the button
3. Press S5 (Wave) again to change the setting of the alarm from On to Off or Off to On.
4. Press S1 (the top button) once to confirm. Or it will announce alarm status confirmation after one minute.
Alarm volume setting:
Slide S4 to set the volume of the talking clock
Turn the clock to silence:
Slide S4 to the OFF (bottom) position to silence the clock
5.
