S-AGR08-Egb01
05/15 - 3
Page 2 of 2
1 General
This manual only deals with the dangers of the use of solvent-based
paints. When processing
water dilutable
coatings use the corre
-
sponding operating instructions.
The automatic spray gun AGR-08-E as such and also the latter to
-
gether with its high voltage generator and cable must be seen only as
components of a system – they do not as such constitute a functional
system overall. No declaration of conformity is therefore applicable,
only a declaration of incorporation. A functional system is created only
in combination with further equipment (air supply/exhaust air system,
materials handling etc.).
1.3 Components
The system AGR-08-E consists of a gun AGR-08-E, the machine adapter, the high voltage cable,
the high voltage generator (REMO HSE HE-30-100k-100), the control board (SMI-1230-30-320m
(DC)) as well as the high-voltage distributor (HVE06/01).
1.4 Guarantee
Therefore, it is recommended to read this operating manual carefully before start-up, as we can
-
not be held liable for damage or malfunctions resulting from the non-observance of this operating
manual.
During the guarantee period repair work and changes only may be carried out by our assemblers
or with our consent.
The system is designed only for the use according to the operating area described in chapter 2
„Operating Area“.
Any other use is considered improper and REITER can not be held liable for any possible damage.
1.5 Copyright
The copyright for this operating manual is retained by REITER GmbH + Co. KG Oberflächentech
-
nik. This operating manual is intended for personnel involved in installation, operation and supervi
-
sion. The operating manual include regulations and technical drawings which may not be copied,
distributed, used for commercial purpose or given to others, either in full or in part.
REITER GmbH + Co. KG
Oberflächentechnik
Phone: +49 (0) 71 95 / 185 - 0
Berglenstraße 23 - 25
Fax:
+49 (0) 71 95 / 185 - 30
D-71364 Winnenden
Email: [email protected]
Attention!
