REITEL SONIRET, Operating Instructions Manual, Page: 8 / 16

8
Installation
The equipment delivered is ready for immediate use. The sealed plug can be connected
directly to the mains supply 230 V/16 A. For installation please refer to chapter 2.
Operation
Note:
•
Do not permanently operate the unit at max. temperature.
•
Best cleaning results are often achieved at medium temperatures (40-50°C).
•
Heating with lid accelerates temperature rise.
•
Always keep the housing clean and dry.
1. Never operate an empty bath! Max. filling level 2/3 of the tank=2,0 l with the required
dose of cleaning additive. (Refer to safety notes in chapter 2!) Please see information on
the required dose on the product label of the cleaning fluid.
2. Switch on the main switch (2) to start the device.
3. Put the items to be cleaned in the metal basket and place the basket in the cleaning bath.
4. Set the required cleaning temperature (20-80 °C):
−
use arrow key (5a) to increase cleaning temperature;
−
use arrow key (5b) to decrease cleaning temperature.
Use key (4) to activate heating.
5. Set cleaning time (normally 3-30 min.), depending on degree of item contamination:
−
Use arrow key (6a) to increase cleaning time;
−
Use arrow key (6b) to decrease cleaning time.
Use key (3) to start cleaning process. Settings are displayed in full minutes.
6. Once the cleaning cycle has finished, remove the metal basket holding the cleaned items
and rinse them in clean water if cleaning additive was used. Finally put on the lid. If the
device is not used for a longer time period, dispose of the cleaning fluid according to
manufacturer’s instructions and wipe the device.