10
Installation
The electrical equipment is being delivered fully installed. The sealed plug can be connected
directly to the mains supply 230 V/16 A. For installation please refer to safety notes in
chapter 2.
Installation
1. Put the RETOMAT furnace onto a stable, fireproof workplace of suitable height (minimum
width 450 mm). Use a fireproof plate for casting ring storage or use the casting ring
drawer.
2. Leave a minimum space of 50 mm around the RETOMAT furnace due to the lateral
cooling openings to enable air circulation.
3.
Don’t deposit any other devices on the RETOMAT furnace to avoid local heat
accumulation.
