12
Use of a steam ventilator or a catalyst
Screw the exhaust extraction unit with the tube connection to the back of the furnace.
Insert plug into device socket (6) of the furnace (backside).
To ensure sufficient ventilation the exhaust tube length must be short. If the required
suction power is too low, additional fans must be included into a longer tube construction.
It’s the customer’s responsibility.
Always place the catalyst or steam ventilator with the exhaust tube leading out of the
building. Contact your installer for information.
Notes:
Please note that the ceramics filter might get blocked due to strong sooting (dependent on
used material). For cleaning remove screw at
chamber’s side and lift the filter upwards.
Rinse with water and reuse after drying.
