REITEL POLIRET TWIN, Operating Instructions Manual

Page: 9 / 20

9
Specific Safety Instructions
Attention:
•
Wait for at least 2 min. before unplugging the mains plug for cutting off the device from
the domestic supply line in order to unload the condensers.
•
The tool must be securely fastened to the spindle.
Danger of injury!
•
Operation at too high motor speed may lead to burns!
•
Keep the housing dry and clean.
•
Tools and lamps may only be changed when the spindle stands still and the whole unit is
unplugged.
•
Fold the protective panel down and wear protective glasses.
•
Only use appropriate and no unbalanced tools. Make sure all tools are fastened securely.
•
Switch suction on.
•
Never touch the running machine.
•
Always follow the instructions of the tool
’s manufacturer (e.g. max. speed, recommended
material).
•
Only use appropriate material for polishing. Follow the instructions provided by polishing
and grinding tool’s manufacturer, especially regarding health protection.
•
Always wear clothing which is tight at the forearms and hands. Avoid loose hair and
jewels which could get into the spindle or tools.
•
Only use clean and disinfected material with the machine.
•
In case of danger press emergency stop button (11). Prior to releasing the emergency
stop button, switch off power switch (13) and both motor switches (7) and (8). To release
the emergency stop button, turn it to the right (see chapter 4.2).
•
Hold the object to be polished tight. Danger of injury from flying particles and danger of
damage to the workpiece.