ENGLISH
______________________________________________________________________________________________
_____________________________________________________________________
C.A.P.T. S.r.l. con Unico Socio
Soggetta a direzione e coord. di
Maschinenfabrik Reinhausen GMBH
Via Postale Vecchia 17
36070 Trissino (VI), Italia
Phone:. +39(0)445/962297
Fax: +39(0)445/490606
http://www.capt.it
E-mail:
PEC :
REINHAUSEN
GROUP
MAN-099-EN - rev.02 EN
10
Figure 10. Figure 11.
Assemble the accessories you find inside the plastic bag like on Figure 12 or figure 14 in case of
aluminum protective cap. The number of washers depends on lid thickness. For instance, for a 2
mm of lid thickness, 7 washers must be used. With a 4 mm lid thickness 5 washers have to be
used and so on. The
nut M27x1,5, for fixing the tap-changer
to lid or tank wall must be
tightened at 15 Nm.
Insert the knob and operate the drive till reaching the same position of tap-changer. See for
instance figures 16 and 17.
After fixing the nut all other accessories can be installed as illustrated on figure 13 or figure 15
The last screw M6x30 must be fixed with a torque value equal to 4,5 Nm.
