Reiner jetStamp 790, Short Instructions, Page: 24 / 88

23
jetStamp 790/790 MP
jetStamp
792/792 MP
1.4. Inserting Printing Cartridge
When using special ink (MP), observe the notes in the operating instructions .
CAUTION
Health risks if ink is swallowed.
f
Don’t swallow!
f
Keep cartridge out of the reach of children!
Inserting Printing Cartridge

Fig. A + C + E
f
Remove the
jetStamp
790/792 from the charging station
4
.
f
Press [MODE] until [INKJET] appears in the display menu bar.
f
Press [INKJET].
The print carriage moves into a central position.
f
Push the locking rail
10
as far back as it will go.
f
Take the new cartridge
13
from its packaging and remove the protective film
16
from nozzles
14
or clip.
f
When using standard ink hold the small felt pad
15
that is provided, against the cartridge
nozzles
14
until some ink appears on the felt.
f
Holding the cartridge handle
9
, insert the cartridge
13
into the print carriage.
f
Pull the locking rail
10
forward again until it locks into place.
f
Press [INKJET].
The print carriage moves to the stamping position.
1.5. Selecting language
Proceed as in menu access (see page 17)
f
Press [NEXT] until “LANGUAGE” appears.
f
To adjust the language setting, press [VARY].
f
To
increase
the
number value
, press [INC].
f
To decrease the number value , press [DEC].
0 = German 5 = Portuguese
1 = French 6 = Flemish
2 = English 7 = Norwegian
3 = Italian 8 = Swedish
4 = Spanish 9 = Danish
f
To move directly to the next menu item,
press [RETURN] once.
– OR –
f
To save changes and to return to the main menu,
press [RETURN] three times.
The main menu appears.