manualshive.com logo in svg

Reiner 880, Operating Instructions Manual, Page: 42 / 55

Share
Download
Reiner 880 Operating Instructions Manual Download Page 42

42

Key  function

•

Once the chipcard function has been activated, the machine 
will only print when a chipcard is inserted.  
If there is no chipcard in the machine, the display will show

Insert chipcard

.

•

‘Password Menu’ should be activated to prevent 
the deactivation of the chipcard by unauthorized persons

Operator  identification  on  the  chip card

•

A user code stored on the chipcard can be stamped at the 
end of an imprint stored  

in the machine

,  or with an 

individual imprint stored  

on the chipcard

. 

To make this possible, the chipcard function must be activated 
(see menu  'Settings / Chipcard',  pages 38, 39)   and 
the desired   imprint number  must be entered.
After inserting a chipcard, the stamping operation 
can be triggered.

•

The maximum width of an imprint is  60 mm,  
i.e. the user code cannot be stamped with all imprints  
(see pages 22 ... 26,   ‘Stored imprints’ )

Example  of  imprint:

Individual  imprint  on  the  chipcard

To use an individual imprint stored on the chipcard, the 
following conditions must be fulfilled:

•

The chipcard must be activated  (see pages 38, 39)

•

Imprint  No. 0  must be selected  (see page 22)

Operator identification

123456 15.12.11 08:45 BSP

i

Note

i

Note

i

Note

Summary of Contents for 880
























































Reviews:

No comments