49
eading a great experience!
Charging the batteries
Whenever MAXLUPE is switched off and supplied with tension via the power supply
unit, the batteries are being charged.
State of charge of the batteries
For your information the state of charge of the batteries is indicated on the left side of the TFT
display. When switching MAXLUPE on (without power supply unit) a great battery symbol
appears.
The symbol of the battery indicates the state of charge:
- completely full - the batteries are fully charged
- half full- the batteries are partly charged, and so on.
Approx. 3 seconds after switching the system on, the battery symbol extinguishes.
Low battery warning
If the battery symbol should change its colour to RED and start flashing when switching
MAXLUPE on or during operation, the batteries need charging immediately.
Note:
If you disregard the invitation to charge the batteries, MAXLUPE automatically switches off all
functions in battery operation. If you continue working in the mains mode without charging the
MAXLUPEV40_deu.qxd 10.11.2006 11:42 Seite 49
