ARNAGE TOWEL RAIL
INSTALLATION GUIDE
Please read these instructions carefully before instalation and operation
1.This Towel Rail is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the Towel Rail by a person responsible for their safety.
2.In order to avoid a hazard, this Towel Rail must be installed so that the bottom
rail is at least 600mm above the floor.
3.This Towel Rail is intended to warm and dry towels and therefore is hot to the
touch.
4.The towel rail is to be installed so that switches and other controls cannot be
touched by a person in the bath or shower.
5.To avoid a hazard this towel rail must not be used to hold towels or any other
articles that have been in contact with oil, petroleum based products or dry
cleaning fluids.
6.Use this Towel Rail only with the voltage specified on the rating label.
7.Do not immerse in liquid or allow liquid to run into the interior of the Towel
Rail. Indoor use only.
8.Do not operate this towel rail if damaged or after the Towel Rail malfunctions
or has been dropped or damaged in any manner. Return to a qualified electrical
person for examination, electrical service or repair.
9.Use this Towel Rail only as described in this manual. Any other use is not
recommended by the manufacturer and may cause fire, electrical shock or
injury.
10. Do not use this Towel Rail in a window as rain may cause electric shock.