Wireless Dongle Kit configuration options:
Some Wireless Dongle Kits will connect directly to an instrument using
only the
Adapter Set
configuration, while other Wireless Dongle Kits will
connect to an instrument using only the
Extension Cable
configuration.
In some instances a Wireless Dongle Kit can connect to an instrument
using either configuration. For those installations it is up to the user to
decide whether you prefer to connect directly using the Adapter Set or if
you prefer to use the Extension Cable to hide the Wireless Dongle from
view behind a counter or under an instrument table.
Follow the instructions for your specific instrument installation.
NOTE:
Your Wireless Dongle Kit may be designed to connect in multiple configurations,
so you may not use all the parts included in this kit for your specific installation.
Connecting AL500:
The
AL500
Auto Lensometer
®
can use either the Adapter Set or the
Extension Cable configuration to connect to the Wireless Dongle Kit. The
serial port (
A
) on the side of the AL500 is where the Wireless Dongle
will connect. In both configurations the Wireless Dongle will need to be
powered by the AC-Power Supply.
The Adapter Set configuration can be used for a direct connection
to AL500.
The Extension Cable configuration can be used to run the Wireless
Dongle to a location hidden from view. Cable Tie Mounts and Cable Ties
are provided to secure any cables or hide them from view. Fasteners are
provided to adhere the Wireless Dongle to the desired location.
(cont.)
AL500 w/ serial port shown
A
