3
DETECTION MODE SELECTION
Detection Mode Function
A
(Highest
Common Factor
Mode)
【
Auto detection
】
The HDMI Splitter will compare the EDID information of each sink
device (Displays). And output of suitable video and audio content
※
If the connected displays are 4K and 1080P and the source is 4K
then each will receive its desired resolution.
※
Low-resolution TV will follow high-resolution TV frame EDID
rendering if the frame is different.
※
TVs with the same resolution and frame rate will have the same
resoluton.
※
The audio format of the output is based on the TV’s EDID.
B
(Priority Mode)
【
Copy the EDID of the first port
】
The source device will set the output signal based on output-1
(primary sink device).
※
When cascading multiple splitters to connect more displays from
OUTPUT 2, 3, or 4 and OUTPUT 1 is not being used. Follow the
system default EDID 4K@60Hz (maximum resolution to 4K).
※
The audio format of the output is based on the TV
’
s EDID and
highest audio format devices is suggested to connect OUTPUT-1
when B mode is set.
Notes.
* 4K@30Hz monitors will display in 1080p@60Hz when the source content is 4K@60Hz.
* Down scaling to 720p and 480p is not supported.
* Frame rate conversion (e.g., 60Hz to 30Hz) is not supported.
