page 11
IR Remote
①
Baud:
Press this button to pop up OSD menu,
then circularly select the serial port baud rate:
115200, 57600, 38400, 19200, 9600
②
Power on or Standby:
Press this button to
power on the switcher or set it to standby
mode.
③
Multiview display mode buttons:
Press these
buttons to select the display mode:
SINGLE - PIP - PBP (1) - PBP (2).
②
③
④
⑤
⑧
⑥
⑦
⑨
①
④
WIN1:
These buttons are available in all modes. On single screen
display mode, press
HD1/HD2/
button to directly / circularly selcet
input source for the WIN1 screen, and the corresponding input LED on
the front panel will light in green. On PIP / PBP(1) / PBP(2) display
mode, press
HD1/HD2/
button to directly / circularly selcet input
source for the WIN1 screen, and both input LEDs on the front panel will
light in green.