Rehau RE.HUB, Quick Start Manual, Page: 3 / 4

The gateway has four buttons on the back of the case:
▪
Z-Wave
7
:
▪
Briefly pressing the button starts the Z-Wave pairing mode (LED
2
flashes rapidly)
It is only possible to pair all the RE.GUARD devices in the RE.GUARD App.
▪
Keeping the button pressed starts the Z-Wave disconnection mode (LED
2
flashes
slowly).
▪
Pressing it again stops the current mode.
▪
Restart
6
: RE.HUB is restarted.
▪
Reset
5
: Resets the device to the factory settings.
Resets the device to the factory settings.
1. Keep the “Reset” button
5
pressed.
2. Pull the power supply plug and insert it again.
3. Keep the “Reset” button
5
pressed until the white LED
2
starts to flash rapidly after
approx. 20 seconds.
4. Release the “Reset” button
5
.
5. The device carries out a restart; this can take up to 5 minutes.
6. Restart the device again.
Find more information at www.rehau.com/gateway.
*USB connection is currently not supported.
1
“Status” LEDs
2
“Mode” LEDs
3
LED
4
LED
5
Reset
6
Restart
7
Z-Wave
8
USB*
9
Power supply
10
LAN
1
2
3
4
5
6
8
9
7
10