Quick start
1. Connect the RE.HUB to your router using the supplied
LAN cable.
2. Connect the RE.HUB to the power supply.
3. Connect your smartphone to the router’s network.
The smartphone and RE.HUB must be in the same network.
4. Download the app “RE.GUARD” from the Android Play Store
or the IOS App Store.
5. Start the app and follow the initial setup instructions.
Mounting
The RE.HUB can be mounted on the wall: Pull the mounting plate on the back of the
gateway downward and attach it to the wall. The RE.HUB can now be snapped in from
above. Pay attention to the length of the power supply cable and the length of the
network cable.
Optimise the radio communication
The RE.HUB is designed to transmit and receive radio signals. Inside a house of brick or
concrete construction, the radio signal typically reaches through one steel-reinforced
concrete ceiling, three walls or a maximum of 20 meters.
Please ensure a smooth radio communication:
▪
Do not install the RE.HUB inside metal cabinets.
▪
Keep a distance of at least 50 cm from metal objects and walls,
ceilings with metal structures, e.g. basement ceilings, and cables.
▪
Keep a distance of at least 50 cm from other radio sources.
▪
If the signal is not sufficient to reach the device, any
network-bound Z-Wave device can be used as a repeater.
LEDs and buttons
The gateway has several LEDs and buttons on the underside:
▪
Green status LEDs
1
: CPU activity, network connection
▪
White LED
2
:
▪
Rapid flashing: Pairing mode started (Inclusion)
▪
Slow flashing: Disconnection mode started (Exclusion)
▪
White LED
4
:
Pulsing: Normal operation
▪
LED
3
and LED
4
are only active with the mounting plate detached:
After updating and restarting, it can take up to five minutes for the LEDs
3
and
4
to
start pulsing, indicating successful completion of the update or the booting process.
Apple App Store
Google Play Store