7
8
Start Air Purifier
1.1 The air purifier is in self-check, the progress bar on display is full when
self-check process is complete.
1.2 If self-check fails, error code will be shown on display. If there are multiple errors occurring, error code will be
shown circularly. Please contact local dealer or call customer service hotline: 400-828-4066.
2.1 Press and hold control button for longer than 3 seconds until you hear a
‘beep’ sound, the air purifier will be in auto mode, the auto mode icon is
on and PM2.5 value is shown on display.
Motor Error
Temperature /
Humidity Sensor Error
CO2 Sensor Error
PM2.5 Sensor Error
External Flash Memory Error
HCHO Sensor Error
TVOC Sensor Error
Back Door Open
AIR PURIFIER PAIRING WITH APP
Preparation
1. Connect Wi-Fi
Make sure that your phone is connected
to Wi-Fi. Do not use the Wi-Fi which re-
quires verification via browser. BREATHE
only supports 2.4 GHz Wi-Fi.
2. Download APP
Scan the QR codes on the right or
search “REHAU Home” from IOS and
Android APP store to download the App.
3. Pair Device
Please pair the device by following
instructions on APP.
ios
Android
FILTER REPLACEMENT
Filter lifetime indication
When filter lifetime is more than 30 days, filter icon is off.
When filter lifetime is less than 30 days, filter icon flash in red.
When filter lifetime is over, filter icon is in red.
If you have paired the air purifier, you can also check filter lifetime status through APP.
You can use “REHAU Home” APP or go to REHAU JD.com online store to order new filters. You can also scan
the QR code on the filter which will direct you to REHAU website to purchase new filters. The APP will notify the
user when it’s time to change the filter.
Turn off and unplug the air purifier before moving, cleaning and replacing the filter.
Replacing filter
1. Open back door and remove the old filter.
2. Unpack the new filters.
3. Put the activated carbon filter in upper side
and put the particle filter in lower side, plug
in the power cable, make sure the air purifier
is in stay-by mode and press and hold the
buttons for longer than 3 seconds until you
hear a ‘beep’ sound, the reset process is
complete. Close the back door, restart the
air purifier.
BREATHE2_User_Manual_Print_EN_Rev 05_2018.11.07.indd 7-8
2018/11/8 16:58:47