2. Tying off the Rope at the hook:
1. Pull the rope through the eyelet making a “U” & loop it around itself as shown in picture A.
2. Loop the rope around itself, front to back 2 - 3 times & pull the rope through “the oval” created by the
rope (back to front) as shown in picture B)
3. Tighten the rope on itself by pulling the knot down to the eyelet as shown in picture C.
Picture A
Picture B
Picture C
4. Pull the shrink rubber over the knot and shrink it by using a heat gun or a hair blower as shown in
pictures D & E.
Picture D
Picture E
3. Problem solving:
1. Pulley wheel is grinding up against the side of the bracket
- The pulley wheel grinds up against the side of its bracket if the bearing has come loose. Please contact
RehabPro, Inc. directly to get a new wheel.
2. The outer layer of my rope has become fuzzy. What should I do?
- The rope should be changed when the outer layers of the rope starts to fray. Please contact RehabPro, Inc.
directly for a new, non-stretchable rope.
6. Technical Information
Total weight:
75.00 lbs.
Width:
26”
Depth:
30”
Height:
68”
Weight Stack:
30.00 lbs.