1. Before setting the splint, remove all locking screws located in the drop lock
(fig.1)
2. Set the brace in the position that you want to reach and lock the
flexion/extension
(fig.2)
using screws
and Allen key
(fig.3)
3. Check the correctness of operation and the range of clock movements
NOTE:
If the orthosis is equipped with two side splints, adjustments must be made separately
on both of them, setting the same angle. The side splints are maintenance-free
The orthosis has been equipped with a side splint which has a
flexion and extension
angle block in the
range of: 0
0
, 20
0
, 45
0
, 70
0
, 90
0
,110
0
, 125
0
.
THE ANGLE OF FLEXION AND EXTENSION IS SPECIFIED BY THE DOCTOR
OR PHYSIOTHERAPIST!
INSTRUCTIONS FOR SETTING
THE RANGE OF MOTION OF THE FLEXION
AND EXTENSION SPLINT
„Joint Flex Control”
REH4MAT
Ul. Piaski 47, 36-060 Głogów Małopolski | Polska
tel. +48 16 62 142 20
Fax +48 16 62 21 42 13 e-mail: [email protected] www.probraces.com www.reh4mat.com
©Reh4Mat 10/2021
fig.3
fig.1
(A)
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
fig.2
( )
( )