│
6
Regulus CSE2 F G75 1F - www.regulus.eu
push button
Performance Display
DISPLAY - LED MARKING
DISPLAY
PERFORMANCE CURVE
STATUS
Max. H
(upper
graph)
1
LOW PERFORMANCE
5 m
2
MEDIUM PERFORMANCE
6 m
3
HIGH PERFORMANCE
7.5 m
WARNING:
LEDs may be turned by 90° or 180°, depending on the specific pump type.
GREEN LED FLASHING FREQUENCY
PWM SIGNAL RECEPTION
1 flash per second
NO
12 flashes per second
YES
When switched on, the pump runs at factory settings or the last setting. The display shows the
current pump performance.
Setting selection for UPM3
To select your desired setting, press the button
repeatedly until you find the setting you need,
see the pic above. If you pass the desired
setting, you have to go one more round until it
appears again.
ERROR DISPLAY
DISPLAY
ERROR
Seized pump
Too low power supply voltage
Electric fault
The LED marking is further omitted for better clarity.
