Regulus ACC30, Installation And Operation Manual

Page: 10 / 68

10 English
DISPLAY FOR HELP, NOTICES AND WARNINGS
By pressing the button the screen for help, messages and warnings will be oppened in
which the following icons are available.
Short manual
Short manual for use of the controller.
Actuator version
Overview of controller type and software version.
Notifications
Log of exceeded maximum temperatures and activated protection functions.
By pressing the buttons and move through the list of notifications.
Press to exit the list.
Warnings
Log of sensors, pump or flow meter failures.
By pressing the buttons and move through the list of warnings.
Press to exit the list.
Delete warning and noti ication logs
P ressing the button will erase notification and warning log. All sensors
that are not connected will be deleted from the list of failures.
Note: Failures of sensors that are required for actuator operation can not
be deleted.
Symbol
Description
Notifications
In case of exceeding the maximum temperature or activation of pro-
tection function, the actuator indicates the event with flashing symbol
on the display. If the maximum temperature is no longer exceeded or
if the protection function is turned off, a lit symbol indicates a recent
event.
Press to open the screen to check notifications.
Warning
In the event of sensor failure, the actuator indicates the failure with
flashing symbol on the display. If the issue is resolved or no longer
present, a lit symbol indicates a recent event.
Press to open the screen to check warnings.
SYMBOLS FOR NOTICES AND WARNINGS