17
INTENDED USE
Operating restrictions
IT IS STRONGLY PROHIBITED TO:
–
Disconnect the scanner socket if the controller is
activated . I .e . it is prohibited to disconnect the scanner
if the green indicator of the controller is switched on .
–
use other charging units different from the stipulated
ones
–
use faulty network sockets and power supplies for
ACC charge
–
turn on the device with apparent damages of protective
isolation and conductors
–
turn on the device when protective shrouds are removed
The User should observe the following operating restrictions when
operating the device:
Сlimatic operational conditions as described in paragraph
1.1.1 of Regula 7505M User’s Guide. Do not use the device
under the rain out-of-doors or out of a vehicle . In case
water or condensate appear on the body of the device
elements, stop the device operation and proceed with it
only after drying;
the device should not be exposed to impacts and strong
vibration when operating and transporting it;
observe quality norms for power supplies, under
paragraph 1.1.2.4 of Regula 7505M User’s Guide;
all commutations of the device components connected
with opening and closing of electric sockets shall be
carried out with deactivated power supply of the device.
NON-OBSERVANCE OF DEVICE OPERATING RESTRICTIONS
CAUSES THE LOSS OF THE MANUFACTURER’S WARRANTY.
Limitations of use:
it is possible to examine only electro-conductive materials
when the scanner type is chosen correctly;
do not operate the device with damaged (through breaks
with sharp edges, heavily crushed), and dirty magnetic
tapes with bent edges (see paragraphs 2 .2 .2 .2 and 3 .2 .2
of Regula 7505M User’s Guide. Failure to observe these
requirements may result in discrepancies during stitching
and jamming of magnetic tapes in the device;
2
2.1
