Precautions of use
Security
Returning
-
Make sure that 240V 50 Hz the supply
voltage does not exceed
240VAC-
50Hz.
- If liquid or any object enters the control
box, unplug the unit and have it
checked by a qualified technician
before returning it o service.
- Prohibition of drilling the control box
The filtration cabinet must be in the
vicinity of the device and be easy to
access.
After switching off the appliance with
the ON/OFF switch, do not open the
a p p l i a n c e u n t i l t h e l i g h t s h a v e
completely extinguished.
Do not store chemical cans near the
appliance.
- Retain the original packing carton
and packing material. They will be
very useful if you ever need to ship the
unit.
- To ensure maximum protection,
repack the unit as it was factory
packaged.
- The Bulleur is an electronic device and must
not be exposed to rain or moisture.
- The technical room must be properly
ventilated.
- The power supply must be protected
upstream by a 30 mA differential circuit-
breaker.
- In order to avoid any risk of electric shock,
open the cabinet only for its installation or a
service intervention (to change an electronic
card) after having cut off the power supply.
Advice
R e g u l ' e l e c t r o n i q u e
designs and manufactures in
its workshops, in France, all
i t s p r o d u c t s o f s a l t
electrolyse, pH regulation and
regulation of water level.
Warranty
- You have just purchased a Regul'
Electronique, we thank you for
your confidence.
- Unless otherwise specified ,the
warranty period for our products is
3 years from the date of your
invoice.
- Excluded from the warranty are any so-called
wear parts(fuses,batteries,seals,air tube,
valves, pump membranes, etc).
- This guarantee is limited to the supplies of
our company. It consists in the repair, by our
care, and in our workshops, defects or
manufacture and matter, that the customer
must prove.
- The equipment must be returned free of
postage. The costs of removal, rest and
transport are excluded from the guarantee.
- In all cases, our responsability is limited to
the replacement of the defective parts, without
any compensation or damage and interest can
be claimed for any damage caused(physical
etc..).
- The guarantee ceases when our materials
are modified outside our workshops.
- The warranty does not apply to replacements
or repairs that result from normal wear and
tear of equipment, damage or accidents
resulting from negligence, faulty monitoring or
maintenance, improper installation or use
abnormal devices.
- In the case of inadequate treatments and
adjustments we cannot be held liable, in
particular in the case of corrosion and defects
due to excessively high operating stresses or
if the equipment must therefore be operated at
high speeds too sustained.
2
