REGO Thermal Printer Technical Manual
www.regotek.com
42
[Description]
Responds to a request from the host computer. n specifies the requests as follows:
n
Request
1
Recover from an error and restart printing from the line where the error
occurred
2
Recover from an error aft clearing the receive and print buffers
[Notes]
This command is effective only when an auto-cutter error occurs.
The printer starts processing data upon receiving this command.
This command is executed when the printer is receiving the command with a serial interface
model.
With a parallel interface model, this command can not be executed when the printer is busy.
This command should not be contained within another command that consists of two or more
bytes.
When the printer is disabled with ESC = (Select peripheral device), the command is still valid.
[Reference]
DLE EOT
DLE DC4 fn m t (fn=1) Generate pulse at real-time
[Name]
Generate pulse at real-time
[Format]
ASCII
DLE
DC4
fn m
t
Hex
10
14
fn m
t
Decimal 16 20
fn m t
[Range]
fn =1
m = 0, 1
1 ≤ t ≤ 8
[Description]
Outputs the pulse specified by t to connector pin m as follows:
m
Connector pin
0
Drawer kick-out connector pin 2.
1
Drawer kick-out connector pin 5.
The pulse ON time is [t × 100 ms] and the OFF time is [t × 100 ms].
[Notes]
When the printer is in an error status when this command is processed, this command is ignored.
When the pulse is output to the connector pin specified while ESC p or DEL DC4 is executed while
this command is processed, this command is ignored.
In serial interface model, this command is executed even when receiving the command.
In parallel interface model, this command cannot be executed when the printer is busy.
If print data includes the same character strings as this command, the printer performs the same
operation specified by this command. The user must consider this.
This command should not be used within the data sequence of another command that consists of
2 or more bytes.
This command is effective even when the printer is disabled with ESC = (Select peripheral device).
[Reference]
ESC p
ESC = n Set peripheral device
[Name]
Set peripheral device
[Format]
ASCII
ESC =
n
Hex
1B
3D
n
