Regner 6000.155.369.350 User Manual Download Page 5

RA67

 IN-LINE ACTUATOR SERIES

5

03. Warranty

All REGNER® products have a warranty against 
manufacturing defects. The warranty period begins 
on the purchase date of the product. The seller is 
responsible for nonconformities that become appar-
ent within the time stipulated by the applicable law.

03.01. Warranty Exclusions

REGNER® is entitled to deny any warranty if:

• The actuator has not been used correctly or its 
usage specifications (load, temperature, duty cycle, 
voltage, current, etc.) have not been respected.
• The actuator has not been maintained correctly.
• The actuator has been manipulated.
• The actuator has been exposed to violent or abra-
sive treatment.

Nonconformities due to reasonable wear and tear 
of the actuator over time (such as faded paint) are 
excluded from warranty.

REGNER® reserves the right to request the return 
of all allegedly defective products for testing and 
verification. 

Any additional warranty obligations for parts 
replaced free of charge or for any service provided 
without charge under this warranty shall be exclud-
ed. The warranty period for parts replaced under 
warranty will end on the expiry date of the warranty 
period of the main product.

02.02. Symbols Used

Important safety information is described under the 
following two symbols:

WARNING!

Failure to follow these instructions can result in 
serious personal injury.

CAUTION!

Failure to follow these instructions can result in the 
actuator being damaged or destroyed.

Summary of Contents for 6000.155.369.350













Reviews: