INSTALLATION
CONTINUED
If the electronic instant hot water appliance is empty of water and is turned
ON then this will be automatically sensed, the display will show "E3". The
tank needs to fill with water through the boiling water control handle on the
tap.
When the display shows "E4", please unplug and plug the boiler. If the
problem still exists, please contact service center to have the tank
checked and repaired.
lf the electronic instant hot water appliance is not powered off or filled with
water then after approximately 5 minutes the electronic instant hot water
appliance will automatically power down until it is primed with water using
the instruction set out earlier.
Once the Temperature is set the light will show Red while the tank is being
heated. Once the temperature has been reached the light will turn to
Green
When the instant hot water is drawn from the instant hot water tap or the
water temperature falls in the electronic instant hot water appliance falls
below the required temperature setting then it will automatically re heat to
the required temperature setting.
To turn off the electronic instant hot water appliance at any time push the
off button.
Summary of Contents for Amanzi
Page 1: ...USER MANUAL...
