Reggiani REVIOS, Installation Manual

Page: 9 / 40

www. reggiani.net
0 9
REVIOS | ENG |
GENERAL FEATURES
The REVIOS product line is composed of
track mounted adjustable projectors, and
the control gear can be set in a vertical or
horizontal position..
REVIOS conforms to directives:
• 2006/95/EC (LV)
• 2004/108/EC (EMC)
• 2009/125/EC (Ecodesign)
• 2002/96/EC (WEEE)
• 2011/65/EC (RoHS)
and to safety standards:
• EN 60598-1
• EN 60598-2-1.
For more technical information about
the product (photometric, electrical data,
size, weight, certification, etc.) refer to
the catalogue or access the product data-
sheet on the website:
www.reggiani.net/reference.
ASSEMBLY INSTRUCTIONS
WARNINGS
Before assembling the projector, careful-
ly read these instructions to make sure
the luminaire functions correctly and
safely.
Keep the instructions in a safe place for
future consultation; contact your supplier
for any problems that may arise.
The projector must not be modified. Mod-
ifying the luminaire in any way invalidates
the guarantee of conformity with stand-
ards and directives in force and it could
make the actual projector hazardous.
Reggiani SPA Illuminazione shall not be
held liable for any damage caused by one
of its projectors if not assembled in con-
formity to the following instructions.
The projector must be installed in accord-
ance with the best working standards.
Before connecting the projector, make
sure the mains power supply corresponds
to the power indicated on the projector
label.
The electrical installation the projector is
connected to must be wired in conformity
to the laws in force.
As a safety guarantee, any components
damaged while operating must be re-
placed with the same components before
the projector is used again.
The minimum distance between the pro-
jector and the lighted object must be 0.5
m for LEDs and 0.8 m for METAL HALIDE
LAMPS.
Never cover the projector during use.
Never use abrasives or solvents to clean
the glass.
1

ON OFF
1

1
2
3
1
C