other connection voids the warranty.
• The electrical system, and the method of electrically connecting the
fixture to it, must be in accordance with the National Electric Code
and local building codes.
• Do not use this apparatus near water.
• WARNING: Risk of electric shock. Do not use with extension cord
near water or where water may accumulate. Keep lamp at least 16
feet from pools and spas. Keep plugs and receptacles dry. For use
only on GFCI protected circuits.
• Disassembly of the fixture will void the warranty.
• If lens is replaced, use only tempered safety glass of equal thick-
ness.
• For maximum bulb life, position light so that the halogen bulb
remains within 4° of horizontal.
• For dry location use.
• Clean only with dry cloth.
• Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce
heat.
• Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other
does. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician
for the replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for
long periods of time.
• Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
SAVE THESE INSTRUCTIONS
NOTE:
Deviation from the assembly instructions may result in a risk of fire or
electric shock.
Assembling your fixture
Step 1:
Carefully remove the cage from box and place on floor in an upright
position. The bottom of the cage contains the legs and hinge assem-
bly for the doors.
Step 2:
Release the light fixture from the cage door by carefully unlatching
4
ENGLISH
SC1000R I.S 325-1439 6/4/04 4:12 PM Page 4
All manuals and user guides at all-guides.com
