www.regentlight.co.za
www.regentlight.co.za
6
7
8
5
This product should be installed by a competent person i.e. Qualified electrician.
This product requires a constant stable electrical supply 220V - 240V VAC 50Hz - alternating current.
The product must be regularly maintained, including the replacement of lamps/LED timeously.
This product could be HAZARDOUS if not used correctly, it could cause electric shock, serious bodily harm or death.
This product is not a toy, please keep away from children.
This product may contain small parts that can be swallowed.
Use only the correct light bulbs/LED as stipulated on the carton for the product.
Any modifications of this product after supply will result in the guarantee being void.
Spare parts may become unavailable over time.Items can vary slightly from the picture on the carton
Coastal humidity can affect the longevity of the light fitting over time.
Be sure to follow the steps in the order given.
Read instructions carefully.
Important Safety Instructions
4
3
B.
Strip the main power supply
cable (Live, neutral and earth),
before connecting. Separately
connect the Live, Neutral and
Earth from the mains power supply
to the electrical cable tail supplied
o n t h e f i t t i n g u s i n g 3 g e l
connectors
(Connector: 3M -
J000788)
to maintain the IP rating.
Connect the electrical cable from
the potted control gear to the
m a i n s u p p l y u s i n g t h e g e l
connectors (supplied).
C.
Inset the two corresponding
c a b l e s c o m p l e t e l y i n t o t h e
connectors. Push the button on the
c o n n e c t o r ( i n d i c a t e d i n
red/orange) to release the gel
resin once the electrical cables
are secure.
3. Feed the electrical cable
through the cable grommet on the
back mounting plate.
Once complete, neatly place the
gel connectors into the wall,
ensuring that the cables are
secure.
(L) Brown/
(N) Blue/
Main supply
Light source
(E) Green/yellow
(L) Brown/
(N) Blue/
(E) Green/yellow
C
B
Strip the cable
before connecting
Press down to release
the gel resin, to retain the
IP rating once the cables
are securely fastened
into the connector.
Connector: 3M - J000788
x3 per bulkhead
DO NOT PLUG
(CONNECT) WHEN
LIVE AS IT WILL CAUSE
DAMAGE TO THE
LUMINAIRE.
Supplied electrical
cable tail
Ensure there is no trapped or pinch
electrical insulation when mounting
the back wall plate to the wall.
4. Fasten the back mounting plate
to the wall.
Ensure there is rubber washers on
the wall screws to maintain the IP
rating of the fitting.
Rubber
washer
Wall screw
