Regency PTO28-1 City Table Outdoor Gas Fireplace
|
19
19
|
installation
OPTIONAL GLASS SURROUND INSTALLATION
1
PTO28
919-214
12/06/12
OPTIONAL GLASS SURROUND INSTALLATION
1.
Remove metal fasteners from the corner brackets.
2.
Assemble the 4 pieces of the glass surround and fasten together with
4 corner top brackets and supplied nylon fasteners as shown below.
3.
Using a fl at screwdriver, secure 4 top corner brackets with nylon
fasteners in each corner, bracket should be fl ush with the top of glass
as shown below.
5.
Secure bottom corner brackets with nylon fasteners in each corner.
6.
Flip the glass back over and place on a soft surface. The glass is now
right side up. The glass should be raised up 1/2" in bracket as shown
below.
4b.
Use supplied spacer tool to determine where the bottom bracket
should be placed and secured.
4a.
After the 4 top brackets are installed - fl ip over and place on a soft
surface, to install the 4 bottom brackets.
7.
Place assembled glass surround on table top - ensure glass is centered
on the table top. Once in correct position, lift up one end, apply double
sided tape that has been cut to size, to the bottom of the brackets.
Repeat process on other end. Press down fi rmly from to secure glass
surround in position. Use care not to scratch surfaces.
1/2"
Insert nylon fastener
here.
Spacer tool
Bottom Bracket
Top Bracket
Nylon fasteners
Nylon fasteners