Regency
®
PG36-5 Gas Log Fireplace
38
MANUAL CONTROL SWITCH REPLACEMENT
1) Unplug the power source.
2)
Open the bottom louver.
6)
Pull out the ECS box by carefully lifting it up off the velcro.
Valve Heat Shield
Heat Shield
ECS Box
8)
Remove the ECS box cover by undoing the 3 screws.
9)
Unplug in the CAT5 cable of the manual control box from the con-
nector in the ECS box.
10)
Plug the replacement manual control switch CAT5 cable into the
connector in the ECS box.
11)
Re-install the cover on the ECS box. Ensure to fi t the rest of the cable
into the groove in the ECS box.
12)
Re-install the heat shield on the ECS box.
13)
Put the ECS box back in place under the fi rebox.
14)
Reverse steps 5 to 1.
Manual Control Box
Louver Bracket
7)
Remove the heat shield from the ECS box by undoing the 2 screws.
ECS Box
3)
Remove the 3 screws that secure the manual control louver bracket
to the louver.
4)
Remove the louver bracket from the manual control box by undoing
one screw.
5)
Remove the valve heat shield by undoing the 2 screws.
MAINTENANCE
