Regency
®
P33 Gas Log Fireplace
27
INSTALLATION
CONVERSION KIT #433-968 FROM NG TO LPG
for P33 using SIT 820 NOVA Gas Valve
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER IF IN DOUBT DO NOT DO THIS CONVERSION !!
Each Kit contains one LPG
Conversion Kit.
LPG Conversion Kit Contains:
Qty. Part #
Description
1
904-163 Burner
Orifi
ce
#54
1
904-529 5/32"
Allen
Key
1
918-590
Label "Converted to
LPG"
1
908-528 Red
"LPG"
label
1
910-037
LP Injector (Pilot Orifi ce)
1
918-550 Instruction
Sheet
6)
Pull off the
pilot cap to
expose the
pilot orifi ce.
Remove the 2 screws, push Burner
Assembly to the left and lift out.
Burner Orifi ce
Installation of LPG Conversion Kit:
1)
Shut off the gas supply.
2)
Remove the louvers (and bay door if it is
installed).
3)
Open the fl ush door and remove the door.
4)
Remove the logs, embers/rockwool.
5)
Remove the 2 screws holding the Burner
Assembly to the fi rebox base. Push the
Burner Assembly to the left and lift out.
7)
Unscrew the pilot orifi ce with the allen
key and replace with the LP pilot orifi ce in
the kit and replace pilot cap.
8)
Remove burner orifi ce with a 1/2" wrench
and discard. Use another wrench to hold
on to the elbow behind the orifi ce.
9)
Reinstall new burner orifi ce LP stamped
#54 and tighten.
10)
Turn control knob to the “OFF” position.
11)
Remove the black protection cap by
hand from the high-low knob (Fig.1).
Fig. 1
12)
Insert a 5/32” or 4mm Allen wrench
into the hexagonal key-way of the
screw (Fig. 2), rotate it counter-
clockwise until it is free and extract it.
13)
Check that the screw is clean and if
necessary remove dirt.
14)
Flip the screw (Fig. 3).
Fig.2
Fig.3
