CGV60 user guide
|
7
user guide
Light / dimmer operation (not available on HRI3E/LRI3E)
Circulating Fan Operation
•
Upon ignition Main Burner and Decorative Burner are
ON
.
•
Simultaneously press
SET
and (small flame) buttons to switch the Burner
OFF
. Printed
instructions are on the battery cover.
•
Simultaneously press
SET
and
(large flame) button to switch Burner
ON
. (The
AUX
symbol
on the display indicates the solenoid valve is OPEN.)
NOTE:
The operation of the
AUX
is blocked in timer
OFF
mode. When the setting of the
Night-
time Setback Temperature is "
--
".
Light /Dimmer
•
Briefly press SET button to scroll to (light bulb) mode. Light bulb icon flashes.
•
Press and hold
(large flame) button to
ON
the light or increase brightness.
•
Press and hold (small flame) button to decrease brightness.
•
In the Light/Dimmer mode, the
OFF
button shuts
OFF
the light.
•
If you want the light
ON
but no flame, press and hold the (small flame)button and turn to
PILOT
flame
NOTE:
The light bulb icon is displayed during light/dimmer setting only. 8 seconds after the light/
dimmer has been set, the handset will automatically go into temperature control mode
(CSA version) or manual mode (CE version).
Circulating Fan
The circulating fan has 4 speed levels from low (1 bar) to high (4 bars).
•
Briefly press
SET
button to scroll to (fan) mode. Fan and Level icons flash.
•
Press
(large flame) button to switch
ON
and increase fan speed.
•
Press (small flame) button to decrease fan speed. To turn
OFF
fan, press (small flame)
button until all 4 speed level bars disappear.
NOTE:
8 seconds after the fan has been set, the handset will automatically go into temperature
control mode (CSA version) or manual mode (CE version). The fan starts 4 minutes after
the gas opens (from
OFF
or from
PILOT
) at maximum speed and goes to the displayed
level after 10 seconds. The fan stops 10 minutes after the gas is
OFF
or at
PILOT
.
