STEP 2:
Attach
Leg (B)
to the underside of the
Return
Top (A)
by lining up the Eclip with its corresponding
holes, and sliding into place
.
While sliding over, line up
Pins with corresponding holes in
Back Panel (C)
and
press into place.
STEP 3:
Using two people, flip over your assembled
Return, and line it up with your assembled Desk Shell.
STEP 1:
Attach
Back Panel (C)
to the underside of the
Return Top (A)
by lining up the Eclip with its corresponding holes,
and sliding into place
(see figure 1).
Any problems or questions call Regency Office Furniture at 1-866-816-9822
Figure 1
Legacy Return Shell • LRT4724 • INSTRUCTIONS
Organize your parts. You may need a rubber mallet.
C
C
A
A
A
B
C
Underside
Right Side
Left Side
SPECIAL NOTE:
Return is reversible. In Step 2, attach
Leg (B)
on left side of
Return Top (A)
for Right Return.
Or, attach on right side of
Return Top (A)
for Left Return.
Return Shell
Desk Shell
Note: Right Return shown.
