Regency HZI390E Owners & Installation Manual Download

Page: 1 / 52

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4

918-982a

MODELS: L390E-NG / L390EB-NG Natural Gas L390E-LP / L390EB-LP Propane
HZI390E-NG / HZI390EB-NG Natural Gas HZI390E-LP / HZI390E-LP Propane

WARNING:
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage. Refer to
this manual. For assistance or additional information consult
an authorized installer, service agency or the gas supplier.

FOR YOUR SAFETY
Do not store or use gasoline or other fl ammable vapours and
liquids in the vicinity of this or any other appliance.

Installation and service must be performed by an authorized
installer, service agency or the gas supplier.

FOR YOUR  SAFETY
What to do if you smell gas:
  Do not try to light any appliance
  Do not touch any electrical switch:

do not use any phone in your
building.

Immediately call your gas supplier

from a neighbour's phone. Follow
the gas supplier's instructions.

If you cannot reach your gas

supplier, call the fi re department.

L390E / HZI390E Gas Insert

07/20/11

Owners &

Installation Manual

Tested by:

Installer: Please complete the details on the back cover

and leave this manual with the homeowner.

Homeowner: Please keep these instructions for future reference.

www.regency-fi re.com

Summary of Contents for HZI390E





















































Search results

Summary of Contents for HZI390E

Reviews:

Related manuals for HZI390E

Brands by name

Popular brands

Regency HZI390E, Owners & Installation Manual

Search results

Summary of Contents for HZI390E

Reviews:

Related manuals for HZI390E

Brands by name

Popular brands