Regency FG39-LPG1 Owners & Installation Manual Download Page 5

Page: 5 / 36

Regency FG39-1 FireGenie Freestanding Gas Stove

SAFETY LABEL

This is a copy of the label that accompanies each
REGENCY FG39 Freestanding Gas Stove. We
have printed a copy of the contents here for your
review. The data plat is located on the inside of
the drop down pedestal door.

NOTE:

Regency units are constantly being

improved. Check the label on the unit and if
there is a difference, the label on the unit is the
correct one.

DO NOT

DO NOT
DO NOT

DO NOT

DO NOT
DO NOT

OPERATE THIS APPLIANCE BEFORE READING THE

INSTRUCTIONS BOOKLET.
PLACE ARTICLES ON OR AGAINST THIS APPLIANCE
STORE CHEMICALS OR FLAMMABLE MATERIALS

SPRAY AEROSOLS IN THE VICINITY OF THIS

APPLIANCE WHILE IN OPERATION.

OPERATE WITH PANELS, COVERS OR GUARDS

REMOVED FROM THIS APPLIANCE.
ENCLOSE THIS APPLIANCE.
DO NOT MODIFY THIS APPLIANCE.

NEAR THIS APPLIANCE.

DO NOT

908-602a

(Australia Only)

Gas Type

LPG

Model
Gas Consumption

40 .

38 .

Manifold Pressure

.94

2.55

Injector Size

1x 50

FG39-NG

FG39-LPG

kPa

Electrical: 240VAC 50Hz 1.0 amp max.

Model

N2134

Regency Gas Fireplace

2.95mm

1.78mm

AGA Approval number to
Code AS4553

6240

261

Distributed by:

Western Australia:

To be installed by an authorised person in

accordance with installation instructions

provided with the appliance.

Air Group Australia
28-30 Division St
Welshpool WA 6106

Fireplace Products
Australia Pty. Ltd.
21-23 South Link Blvd.
Dandenong, VIC 3175

Eastern Australia:

Summary of Contents for FG39-LPG1




































Search results

Summary of Contents for FG39-LPG1

Reviews:

Regency FG39-LPG1, Owners & Installation Manual, Page: 5 / 36

Search results

Summary of Contents for FG39-LPG1

Reviews: