Regency F39-LPG Owners & Installation Manual Download Page 12

Page: 12 / 31

Regency

F39 Room Sealed Freestanding Gas Stove

Pipe Length

Round Support

Box/Wall Thimble

(Part # 940)

Round

Support Box/
Wall Thimble

(Part # 940)

Vertical

Terminal

Storm Collar

Part # 953

Flashing

943 or 943S

Ceiling Firestop

(Part # 963)

24" (610mm)

Pipe Length

Adj.Pipe Length

11" - 14-5/8"

(279mm - 372mm)

90 Elbow

Wall Thimble

Part # 942

Vinyl Siding

Standoff (Optional)

Part #950

AstroCap

Termination Cap

(Part# 946-523)

DURA-FLUE

TERMINATION KIT

Planning Your Dura-Flue

Installation

There are two basic types of Dura-Flue Room
Sealed System installations: horizontal termi-
nation and vertical termination. Conﬁ rm the
maximum horizontal run and maximum vertical
rise from the diagrams, refer to "Fluing Arrange-
ments" section.

When planning your installation, it will be nec-
essary to select the proper length of ﬂ ue pipe
for your particular requirements. For horizontal
installations, determine the minimum clearance
from the rear of the unit to the wall. It is also
important to note the wall thickness. (The wall
thimble is suitable for 2 x 4 or 2 x 6 wall construc-
tion.) Select the amount of vertical rise desired
for "vertical-to-horizontal" type installations.

Warning: Always maintain required clear-
ances (air spaces) to nearby combustibles
to prevent a ﬁ re hazard. Do not ﬁ ll air spaces
with insulation.

The minimum clearance requirements between
the outer wall of the ﬂ ue pipe and nearby com-
bustible surfaces is 1-1/4 inch. Be sure to check
the ﬂ ue termination clearance requirements
from decks, windows, sofﬁ ts, gas regulators, air
supply inlets and public walkways as speciﬁ ed
in the Exterior Flue Terminal Locations on page
8 and in your local building codes.

To determine the length of ﬂ ue pipe required
for vertical installations, measure the distance
from the unit ﬂ ue outlet to the ceiling, the ceiling
thickness, the vertical rise in an attic or second
storey, and allow for sufﬁ cient vertical height
above the roof line.

For multi-storey applications, ﬁ re stops are
required at each ﬂ oor level. If an offset is
needed, additional pipe, elbows and supports
will be required.

Do not exceed the maximum number of elbows.
One 90

for horizontal terminations and two 45

for vertical termination.

DURA-FLUE FLUING

COMPONENTS

You will require the following components with
your new Regency

Room Sealed Freestand-

ing Gas Stove. Please review your product to
make sure you have everything you need. In
the eﬂ ue that you are missing any part, contact
your dealer.

Note:

These are the minimum pieces re-
quired. Other parts may be required
for your particular installation. See
page 12 for a list of ﬂ ue parts.

If installing termination on a siding covered wall,
a vinyl siding standoff or furring strips can be
used in order to ensure that the termination is
not recessed into siding.

The vinyl siding standoff is required for walls
with vinyl siding.

Minimum components for a Dura-Flue
Horizontal
Installation:

A) Dura-Flue

Horizontal

Termination

Kit

B) Wall Thimble (required for combus-
tible

walls)

Minimum components for a Dura-Flue Verti-
cal Termination:

C) Dura-Flue

Vertical

Termination

Kit

See page 12 for pipe lengths.

The Simpson Dura-Flue Room Sealed System
offers a complete line of component parts for
installation of both horizontal and vertical installa-
tion. Many items are offered in decorative black,
as well as galvanized ﬁ nish. The galvanized pipe

INSTALLATION

and ﬁ ttings are used for concealed locations
such as attics or where corrosion is a factor,
such as above the roof line. Decorative brass
trim kits are available for both wall thimbles and
ceiling support boxes.

Part #

Description

971 Horiz.

Termination

Kit

includes:

black elbow, wall thimble cover,

horiz. square termination cap,

24"

black pipe, 11" -14" 5/8" adjust-

able

black pipe