background image

Regency

®

 F33-3 Freestanding Gas Stove

25

WARRANTY

part is returned to the distributor, dealer or agent for inspection if requested by FPI.  Alternatively, FPI may at its 

own discretion fully discharge all of its obligations under the warranty by refunding the verified purchase price of 

the product to the original purchaser.  The purchase price must be confirmed by an original copy of the tax invoice.   

 

The authorised selling dealer, or an alternative authorised FPI dealer if pre-approved by FPI, is responsible for all 

in-field diagnosis and service work related to all warranty claims.  This warranty does not cover dealer travel 

costs for diagnostic or service work.  Dealers may charge homeowner for travel and additional time.  Check with 

your selling dealer in advance for any costs to you when arranging a warranty call.  FPI is not responsible for 

results or costs of workmanship of unauthorised FPI dealers or agents in the negligence of their service work.  

Additional service fees may apply if you are seeking warranty service from a dealer other than the dealer from 

whom you originally purchased the product. 

 

At all times FPI reserves the right to inspect reported complaints on location in the field claimed to be defective 

and determine whether the warranty will apply prior to processing or authorising of any claim.  Failure to allow 

this upon request will void the warranty. 

 

All warranty claims must be submitted by the dealer servicing the claim, including an original copy of the tax 

invoice (proof of purchase by you).  All claims must be complete and provide full details as requested by FPI to 

receive consideration for evaluation, including proof of maintenance records.  Incomplete claims may be rejected.  

FPI has absolute discretion to assess and determine any warranty claim and may accept or reject a claim as it 

considers appropriate.  Any part or parts of the unit found to be defective will be repaired or replaced at FPI's 

option, through an accredited distributor or service agent provided that the defective part be returned to the 

distributor or agent, 

Transportation Prepaid, if requested.  It is the general practice of FPI to charge for larger, 

higher priced replacement parts and issue credit once the replaced component has been returned to FPI and 

evaluated for manufacturer defect. 

 

If a consumer has a unit installed outside an accredited distributor, dealer or pre-approved service agent’s 

service area, or the closest approved service agent is situated more than thirty (30) kilometres from the 

installation, FPI is not obliged to arrange warranty repairs or shipping/transportation costs.  In these cases, the 

consumer must arrange warranty service with its selling dealer, and shipping, travel and/or additional labor 

charges will apply. 

 

Unit must be installed according to all manufacturers’ instructions as per the manual. 

 

All Local and National required codes must be met. 

 

The installer is responsible to ensure the unit is operating as designed at the time of installation. 

 

The original purchaser is responsible for annual maintenance of the unit, as outlined in the owner’s manual.  As 

outlined below, the warranty may be voided due to problems caused by lack of maintenance.  Annual maintenance 

records should be retained.

  

 

Repair/replacement parts purchased by the consumer from FPI after the original coverage has expired 

on the unit will carry a 90 day warranty, valid with a receipt only. Any item shown to be defective will be 

repaired or replaced at our discretion. No labor coverage is included with these parts.

 

 

Exclusions: 

This Limited Lifetime Warranty does not extend to paint, rust or corrosion of any kind due to a lack of maintenance 

or improper venting, combustion air provision, corrosive chemicals (i.e. chlorine, salt, air, etc.), door or glass 

gasket. 

 

Malfunction, damage or performance based issues as a result of environmental conditions, location, chemical 

damages, downdrafts, installation error, installation by an unqualified installer, incorrect chimney components 

(including but not limited to cap size or type), operator error, abuse, misuse, use of improper fuels, accidents, lack 

of regular maintenance and upkeep, acts of God, weather related problems from hurricanes, tornados, 

earthquakes, floods, lightning strikes/bolts or acts of terrorism or war, which result in malfunction of the appliance 

are not covered under the terms of this Limited Lifetime Warranty.  

Revision Date: December 2016 

 

Regency Gas Products Warranty 

 

Summary of Contents for F33

































Reviews: