manualshive.com logo in svg

Regency 4821, User Manual, Page: 2 / 48

Share
Download
Regency 4821 User Manual Download Page 2

ii

STATUS: LCD Display........................................... 31
Default LCD Display .............................................. 31

Viewing Zone Descriptions ................................ 31
System Testing ................................................... 32

U  Auto Test........................................................... 32

U  Dialer Test........................................................ 32

Emergency Procedures ....................................... 33

In Case of Accidental Activation........................ 33
When an Alarm Occurs ...................................... 33
Silencing Alarms ................................................ 34

Troubleshooting................................................... 35

Identifying Sounds ............................................. 35
Power Outages (No AC Power) ......................... 36
Accidental Activation......................................... 36
Touchpad Display Reads “System Trouble” ...... 36
Not Ready Zones ................................................ 36
System Messages................................................ 37

Terms Used in This Manual................................. 43

Quick Reference................................................... 45

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for 4821

















































Reviews:

No comments