27
•
If you are using the duress alarm feature, make
certain that no access codes begin with the digit(s)
you selected as a duress trigger.
•
Write down new access code numbers and keep
them in a secure location.
Changing a code (or adding a new code)
Do not reprogram access codes unless your installer has
recommended it. If you need to reprogram access
codes, here are the steps:
1.
Make sure the system is disarmed and that you are
not in the set time mode.
2.
Press
7
TEST
followed by your
main access
code
.
3.
The display will show
"BULK LOAD?"
If you
are programming multiple cards or codes, all of
which will have the same user profile, select Yes.
To program each card or code individually, select
No for the Bulk Load option.
4.
The display shows
"CODE#:__".
Enter the # of
the code you want to change, then press
TEST
.
5.
The display now shows
"PROFILE#__"
. Select
the profile (0-15) that will be used with this code,
then press
TEST
. (If you selected Yes for "Bulk
Load" in step 3, this step will be skipped for the rest
of the codes you program. All codes programmed
during this session will have the same user profile.)
6.
The code number for that user displays. Press
CLR
, enter the
new
access code, then press
TEST
.
7.
To locate another code to work with:
press
INT
plus the
number
of the code you want
to change (not the code itself), then press
TEST
.
- OR -
Press
TEST
as many times as necessary until the
code you want to change displays.
Technical Manuals Online! - http://www.tech-man.com
