20
Regency IG34 Gas Inbuilt Fireplace
INSTALLATION
Back of Faceplate
Back of Touch
Pad
Jack
Back of Faceplate
Bracket
Thermodisc
1)
Position faceplate near the unit and
plug the jack from the wiring
harness from the unit into the back of the touch pad - as shown
below.
3)
Secure wiring along the vertical right side of the faceplate (facing
the back of the faceplate) with supplied grey adhesive clips.
2)
Take the limit switch harness from the unit and slide the thermodisc
into the bracket located on the top backside of the faceplate. Se-
cure with 2 screws as shown below.
Note:
Ensure that the fl anges on the sides of the fi rebox
are on the outside, when installing the faceplate
(see below).
Faceplate
Flange on fi rebox
4)
Position faceplate on unit lining up screw holes on
faceplate with screw holes on unit - secure with 4 screws.
THERMODISC & FACEPLATE/DOORFRAME INSTALLATION