I1200 Regency Wood Insert
13
15)
Cut the bottom edge of the fan support (using a metal cutting blade)
to the length measured in step 14.
16)
Remove the fan assembly from the ash lip of the insert and position
the fan support to the bottom of the fan assembly.
17)
Drill 4 x 5/32" holes to the underside of the fan assembly using the
holes in the fan support as a guide. See Diagram 9
Diagram 9: Rear / Bottom View
18)
Secure the fan support to the fan assembly using 4 self tapping
screws. See Diagram 9.
19)
Re-attach the fan/fan support assembly to the ash lip of the insert.
Completed Faceplate Assembly
INSTALLATION
