Regency Fireplace Products FG39LPG1-BRA Owners & Installation Manual Download Page 1

Page: 1 / 44

October 2, 2020

FOR YOUR SAFETY

What to do if you smell gas:

Do not try to light any appli-

ance

Do not touch any electri-

cal switch: do not use any

phone in your building.

Immediately call your gas

supplier from a neighbour's

phone. Follow the gas sup-

plier's instructions.

If you cannot reach your

gas supplier, call the fire

department.

WARNING:

Improper installation, adjustment, altera-

tion, service or maintenance can cause

injury or property damage. Refer to this

manual. For assistance or additional in-

formation consult an authorized installer,

service agency or the gas supplier.
FOR YOUR SAFETY

Do not store or use gasoline or other flam

mable vapours and liquids in the vicinity of

this or any other appliance.
Installation and service must be performed

by an authorized installer, service agency or

the gas supplier.

PLEASE KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE

Owners &

Installation

Manual

LISTINGS AND CODE APPROVALS

These gas appliances have been tested in

accordance with AS4553, NZS 5262 and

have been certified by the Australian Gas

Association for installation and operation

as described in these Installation and

Operating Instructions.

Your unit should be serviced annually

by an authorised service person.

918-646g

Models: FG39NG1-BRA

FG39LPG1-BRA

Freestanding Gas Stove

Summary of Contents for FG39LPG1-BRA













































Search results

Summary of Contents for FG39LPG1-BRA

Reviews:

Related manuals for FG39LPG1-BRA

Brands by name

Popular brands

Regency Fireplace Products FG39LPG1-BRA, Owners & Installation Manual

Search results

Summary of Contents for FG39LPG1-BRA

Reviews:

Related manuals for FG39LPG1-BRA

Brands by name

Popular brands